XCY-73 2100*1050 shaker is one of the common equipment for laboratory to carry out ore washability research, test and gravity beneficiation. It is suitable for the separation of fine and fine rare metals, ferrous metals, non-ferrous metals, precious metals and other ores and coal. It can be used not only as an independent beneficiation operation, but also in conjunction with jigs, screw concentrators, centrifugal concentrators and other beneficiation methods. The equipment is based on the difference in specific gravity of the selected minerals and the stratification performance in the cross-flow of the bed with reciprocating asymmetric movement and inclination. Minerals with different specific gravity zoning on the bed surface is obvious and the quality of the concentrate is high. It is easy to operate and adjust.
　　technical specifications

Model	Stroke mm	Rush times	Processing capacity	water consumption	Motor power kw	Adjustment range of bed inclination angle	Bed Size mm
		Sub / sub	Ton / hour	L / h			（L×W×H）
XCY-73	10～30	250～450	0.7～1.4	0.5～15	1.1	0.5 ~9.5 (the middle position is 5 and the adjustment range is +4.5)	3045×1050×1020

　　(Note: The value of treatment capacity and water consumption in the table is the value of 0.5 mm feed size).
　　1. Model specifications: XCY-73 2100*1050 mm.
　　2. Stroke: 10-30 mm.
　　3. Push times: 250 rpm, 350 rpm and 450 rpm.
　　4. Bed inclination angle adjustment range: 0.5 ~9.5 (middle position is 5, adjustment range is +4.5).
　　5. Processing capacity: 0.7-1.4 t/h (feed size is 0.5 mm).
　　6. Water consumption: 0.5-15 liters per hour (feed size is 0.5 mm).
　　7. Bed size: 2100 mm in length, 1050 mm in width at feeding end and 850 mm in width at discharging end.
　　8. Motor: Model Y90L-6, 1.1 kW power, 930 rpm.
　　9. Triangular belt: Model B, length 2007mm.
　　10. Shape size: 3045 mm long, 1050 mm wide and 1020 mm high.